Reality-Assisted Evolution of Soft Robots through Large-Scale Physical Experimentation: A Review.

Journal: Artificial life
Published Date:

Abstract

We introduce the framework of reality-assisted evolution to summarize a growing trend towards combining model-based and model-free approaches to improve the design of physically embodied soft robots. , data-driven models build, adapt, and improve representations of the target system using real-world experimental data. By simulating huge numbers of virtual robots using these data-driven models, optimization algorithms can illuminate multiple design candidates for transference to the real world. , large-scale physical experimentation facilitates the fabrication, testing, and analysis of multiple candidate designs. Automated assembly and reconfigurable modular systems enable significantly higher numbers of real-world design evaluations than previously possible. Large volumes of ground-truth data gathered via physical experimentation can be returned to the virtual environment to improve data-driven models and guide optimization. Grounding the design process in physical experimentation ensures that the complexity of virtual robot designs does not outpace the model limitations or available fabrication technologies. We outline key developments in the design of physically embodied soft robots in the framework of reality-assisted evolution.

Authors

  • Toby Howison
    University of Cambridge, Bio-Inspired Robotics Lab. th533@cam.ac.uk.
  • Simon Hauser
    Institute of Robotics and Intelligent Systems, Department of Mechanical and Process Engineering, ETH Zürich, 8092 Zürich, Switzerland; Biorobotics Laboratory, EPFL-Ecole Polytechnique Fédérale de Lausanne, 1015 Lausanne, Switzerland.
  • Josie Hughes
    CREATE-Lab, Department of Mechanical Engineering, Swiss Federal Technology Institute of Lausanne (EPFL), Lausanne, Switzerland.
  • Fumiya Iida
    Institute of Robotics and Intelligent Systems, Department of Mechanical and Process Engineering, ETH Zürich, 8092 Zürich, Switzerland; Department of Engineering, University of Cambridge, Cambridge CB2 1PZ, United Kingdom.