Real-time noise cancellation with deep learning.

Journal: PloS one
PMID:

Abstract

Biological measurements are often contaminated with large amounts of non-stationary noise which require effective noise reduction techniques. We present a new real-time deep learning algorithm which produces adaptively a signal opposing the noise so that destructive interference occurs. As a proof of concept, we demonstrate the algorithm's performance by reducing electromyogram noise in electroencephalograms with the usage of a custom, flexible, 3D-printed, compound electrode. With this setup, an average of 4dB and a maximum of 10dB improvement of the signal-to-noise ratio of the EEG was achieved by removing wide band muscle noise. This concept has the potential to not only adaptively improve the signal-to-noise ratio of EEG but can be applied to a wide range of biological, industrial and consumer applications such as industrial sensing or noise cancelling headphones.

Authors

  • Bernd Porr
    Division of Biomedical Engineering, School of Engineering, University of Glasgow, Glasgow, G12 8QQ, UK.
  • Sama Daryanavard
    Biomedical Engineering, James Watt School of Engineering, University of Glasgow, Glasgow, United Kingdom.
  • Lucía Muñoz Bohollo
    Biomedical Engineering, James Watt School of Engineering, University of Glasgow, Glasgow, United Kingdom.
  • Henry Cowan
    Biomedical Engineering, James Watt School of Engineering, University of Glasgow, Glasgow, United Kingdom.
  • Ravinder Dahiya
    Bendable Electronics and Sensing Technologies (BEST) Group, James Watt School of Engineering, University of Glasgow, Glasgow, United Kingdom.