Interactive and synergistic behaviours of multiple heterogeneous microrobots.

Journal: Lab on a chip
PMID:

Abstract

Microrobots have been extensively studied for biomedical applications, and significant innovations and advances have been made in diverse aspects of the field. However, most studies have been based on individual microrobots with limited capabilities, constraining their scalability of functions for practical use. Here, we demonstrate the interactive and synergistic behaviours of multiple microrobots that are heterogeneous or incompletely homogeneous. A frequency-response theory is proposed where in a certain frequency range of an external rotating magnetic field (RMF), microrobots with dispersed and linearly aligned magnetic nanoparticles (MNPs) would exhibit similar and different behaviour, respectively. These microrobots rotate following the rotation of the external field, and such complete rotational motion is interrupted when the frequency exceeds a certain value, called the critical frequency (), but such behaviour is more prominent in microrobots with linear MNPs. Upon further investigating the effect of various parameters on the of the microrobots during the fabrication process, we find that heterogeneous microrobots with specific values can be customized. In addition, experiments and simulations are combined to show the hydrodynamic behaviours around the rotating microrobots at different frequencies. Based on these findings, the interactive and synergistic behaviours of multiple microrobots are presented, which suggests great potential for the independent execution of multiple tasks or the synergistic performance of complex tasks and is significant for the future development of interactive synergistic microrobots in the biomedical field.

Authors

  • Shilu Zhu
    School of Biomedical Engineering and the 3D-Printing and Tissue Engineering Center (3DPTEC), Anhui Medical University, Hefei 230032, China. yangrunhuai@ahmu.edu.cn.
  • Weijie Zheng
    School of Biomedical Engineering and the 3D-Printing and Tissue Engineering Center (3DPTEC), Anhui Medical University, Hefei 230032, China. yangrunhuai@ahmu.edu.cn.
  • Jian Wang
    Veterinary Diagnostic Center, Shanghai Animal Disease Control Center, Shanghai, China.
  • Xingmiao Fang
    School of Biomedical Engineering and the 3D-Printing and Tissue Engineering Center (3DPTEC), Anhui Medical University, Hefei 230032, China. yangrunhuai@ahmu.edu.cn.
  • Lijiu Zhang
    Dastroenterology Department, The Second Affiliated Hospital of Anhui Medical University, Hefei 230601, China.
  • Fuzhou Niu
    School of Mechanical Engineering Suzhou University of Science and Technology Suzhou, Jiangsu 215009, China.
  • Ying Wang
    Key Laboratory of Macromolecular Science of Shaanxi Province, School of Chemistry & Chemical Engineering, Shaanxi Normal University, Xi'an, Shaanxi 710062, China.
  • Tingting Luo
    School of Biomedical Engineering and the 3D-Printing and Tissue Engineering Center (3DPTEC), Anhui Medical University, Hefei 230032, China. yangrunhuai@ahmu.edu.cn.
  • Guangli Liu
    School of Biomedical Engineering and the 3D-Printing and Tissue Engineering Center (3DPTEC), Anhui Medical University, Hefei 230032, China. yangrunhuai@ahmu.edu.cn.
  • Runhuai Yang
    School of Biomedical Engineering, Anhui Medical University, Hefei 230032, P.R.China.