Effect of the electronegativity on the electrosorption selectivity of anions during capacitive deionization.

Journal: Chemosphere
PMID:

Abstract

The effect of electronegativity on the electrosorption selectivity of anions during capacitive deionization was investigated via a combination of experimental and theoretical studies. A model was developed based on chemical thermodynamics and the classic Stern's model to reveal the role of the anode potential and to describe electrosorption selectivity behavior during capacitive deionization. The effects of the anode potential on the adsorption of Cl and ReO were studied and the obtained data were used to validate the model. Using the validated model, the effects of the anode potential and electronegativity of various anions, including Cl, ReO, SO and NO were assessed. The experimental results for the electrosorption of Cl and ReO corresponded well with the developed model. The electrosorption capacity demonstrates a logarithmic relationship with the anode potential. The model showed that the electronegativity significantly affects the selectivity. In a mixed Cl, ReO, SO and NO solution, ReO was preferentially adsorbed over the other three anions, and the following selectivity was exhibited: ReO > NO > Cl > SO. The results showed that the effect of flow rates on the electrosorption selectivity can be considered negligible when the flow rates are higher than 112 mL min. The anions selectivity can be further enhanced by increasing the anode potential, and electrosorption selectivity is no appreciable decline after 6 experiments.

Authors

  • Zhumei Sun
    School of Metallurgy and Environment, Central South University, Changsha, 410083, China.
  • Liyuan Chai
    School of Metallurgy and Environment, Central South University, Changsha, 410083, China; Chinese National Engineering Research Center for Control & Treatment of Heavy Metal Pollution, Changsha, 410083, China. Electronic address: chailiyuan@csu.edu.cn.
  • Mingshi Liu
    School of Metallurgy and Environment, Central South University, Changsha, 410083, China.
  • Yude Shu
    School of Metallurgy and Environment, Central South University, Changsha, 410083, China.
  • Qingzhu Li
    School of Metallurgy and Environment, Central South University, Changsha, 410083, China; Chinese National Engineering Research Center for Control & Treatment of Heavy Metal Pollution, Changsha, 410083, China.
  • Yunyan Wang
    School of Metallurgy and Environment, Central South University, Changsha, 410083, China; Chinese National Engineering Research Center for Control & Treatment of Heavy Metal Pollution, Changsha, 410083, China.
  • Dingfan Qiu
    School of Metallurgy and Environment, Central South University, Changsha, 410083, China; Beijing General Research Institute of Mining and Metallurgy, Beijing, 100044, China.