Microfluidic manipulation by spiral hollow-fibre actuators.

Journal: Nature communications
PMID:

Abstract

A microfluidic manipulation system that can sense a liquid and control its flow is highly desirable. However, conventional sensors and motors have difficulty fitting the limited space in microfluidic devices; moreover, fast sensing and actuation are required because of the fast liquid flow in the hollow fibre. In this study, fast torsional and tensile actuators were developed using hollow fibres employing spiral nonlinear stress, which can sense the fluid temperature and sort the fluid into the desired vessels. The fluid-driven actuation exhibited a highly increased response speed (27 times as fast as that of air-driven actuation) and increased power density (90 times that of an air-driven solid fibre actuator). A 0.5 K fluid temperature fluctuation produced a 20° rotation of the hollow fibre. These high performances originated from increments in both heat transfer and the average bias angle, which was understood through theoretical analysis. This work provides a new design strategy for intelligent microfluidics and inspiration for soft robots and smart devices for biological, optical, or magnetic applications.

Authors

  • Sitong Li
    State Key Laboratory of Medicinal Chemical Biology, College of Chemistry and College of Pharmacy, Key Laboratory of Functional Polymer Materials, Frontiers Science Center for New Organic Matter, Nankai University, Tianjin, 300071, China.
  • Rui Zhang
    Department of Cardiology, Zhongda Hospital, Medical School of Southeast University, Nanjing, China.
  • Guanghao Zhang
    School of Electrical and Electronic Engineering, Nanyang Technological University, Nanyang Avenue, Singapore 639798, Singapore. Electronic address: gzhang009@ntu.edu.sg.
  • Luyizheng Shuai
    State Key Laboratory of Medicinal Chemical Biology, College of Chemistry and College of Pharmacy, Key Laboratory of Functional Polymer Materials, Frontiers Science Center for New Organic Matter, Nankai University, Tianjin, 300071, China.
  • Wang Chang
  • Xiaoyu Hu
    State Key Laboratory of Medicinal Chemical Biology, College of Chemistry and College of Pharmacy, Key Laboratory of Functional Polymer Materials, Frontiers Science Center for New Organic Matter, Nankai University, Tianjin, 300071, China.
  • Min Zou
    School of Public Health (Shenzhen), Shenzhen Campus of Sun Yat-sen University, Shenzhen 518107, P.R. China.
  • Xiang Zhou
    Department of Sociology, Harvard University, Cambridge, Massachusetts, USA.
  • Baigang An
    School of Chemical Engineering, University of Science and Technology Liaoning, Anshan, 114051, China.
  • Dong Qian
  • Zunfeng Liu