Design, Implementation and Validation of the Three-Wheel Holonomic Motion System of the Assistant Personal Robot (APR).

Journal: Sensors (Basel, Switzerland)
Published Date:

Abstract

This paper presents the design, implementation and validation of the three-wheel holonomic motion system of a mobile robot designed to operate in homes. The holonomic motion system is described in terms of mechanical design and electronic control. The paper analyzes the kinematics of the motion system and validates the estimation of the trajectory comparing the displacement estimated with the internal odometry of the motors and the displacement estimated with a SLAM procedure based on LIDAR information. Results obtained in different experiments have shown a difference on less than 30 mm between the position estimated with the SLAM and odometry, and a difference in the angular orientation of the mobile robot lower than 5° in absolute displacements up to 1000 mm.

Authors

  • Javier Moreno
    Department of Computer Science and Industrial Engineering, Universitat de Lleida, Jaume II, 69, 25001 Lleida, Spain. jmoreno@diei.udl.cat.
  • Eduard Clotet
    Department of Computer Science and Industrial Engineering, Universitat de Lleida, Jaume II, 69, 25001 Lleida, Spain. eclotet@diei.udl.cat.
  • Ruben Lupiañez
    Department of Computer Science and Industrial Engineering, University of Lleida, 25001 Lleida, Spain. robotica@udl.cat.
  • Marcel Tresanchez
    Department of Computer Science and Industrial Engineering, Universitat de Lleida, Jaume II, 69, 25001 Lleida, Spain. mtresanchez@diei.udl.cat.
  • Dani Martínez
    Department of Computer Science and Industrial Engineering, Universitat de Lleida, Jaume II, 69, 25001 Lleida, Spain. dmartinez@diei.udl.cat.
  • Tomàs Pallejà
    Barton Laboratory, Cornell University, Geneva, NY 14456, USA. tpc63@cornell.edu.
  • Jordi Casanovas
    Department of Computer Science and Industrial Engineering, University of Lleida, 25001 Lleida, Spain. jcasanovas@quimica.udl.cat.
  • Jordi Palacín
    Department of Computer Science and Industrial Engineering, Universitat de Lleida, Jaume II, 69, 25001 Lleida, Spain. palacin@diei.udl.cat.