Quantitative analysis of glycated albumin in serum based on ATR-FTIR spectrum combined with SiPLS and SVM.

Journal: Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy
Published Date:

Abstract

A rapid quantitative analysis model for determining the glycated albumin (GA) content based on Attenuated total reflectance (ATR)-Fourier transform infrared spectroscopy (FTIR) combining with linear SiPLS and nonlinear SVM has been developed. Firstly, the real GA content in human serum was determined by GA enzymatic method, meanwhile, the ATR-FTIR spectra of serum samples from the population of health examination were obtained. The spectral data of the whole spectra mid-infrared region (4000-600 cm) and GA's characteristic region (1800-800 cm) were used as the research object of quantitative analysis. Secondly, several preprocessing steps including first derivative, second derivative, variable standardization and spectral normalization, were performed. Lastly, quantitative analysis regression models were established by using SiPLS and SVM respectively. The SiPLS modeling results are as follows: root mean square error of cross validation (RMSECV) = 0.523 g/L, calibration coefficient (R) = 0.937, Root Mean Square Error of Prediction (RMSEP) = 0.787 g/L, and prediction coefficient (R) = 0.938. The SVM modeling results are as follows: RMSECV = 0.0048 g/L, R = 0.998, RMSEP = 0.442 g/L, and R = 0.916. The results indicated that the model performance was improved significantly after preprocessing and optimization of characteristic regions. While modeling performance of nonlinear SVM was considerably better than that of linear SiPLS. Hence, the quantitative analysis model for GA in human serum based on ATR-FTIR combined with SiPLS and SVM is effective. And it does not need sample preprocessing while being characterized by simple operations and high time efficiency, providing a rapid and accurate method for GA content determination.

Authors

  • Yuanpeng Li
    Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Jinan University, Guangzhou 510632, China; Department of Optoelectronic Engineering, Jinan University, Guangzhou 510632, China.
  • Fucui Li
    Department of Optoelectronic Engineering, Jinan University, Guangzhou 510632, China.
  • Xinhao Yang
    Department of Optoelectronic Engineering, Jinan University, Guangzhou 510632, China.
  • Liu Guo
    Department of Optoelectronic Engineering, Jinan University, Guangzhou 510632, China.
  • Furong Huang
    Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Jinan University, Guangzhou 510632, China; Research Institute of Jinan University in Dongguan, Dongguan 523000, China. Electronic address: furong_huang@jnu.edu.cn.
  • Zhenqiang Chen
    Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Jinan University, Guangzhou 510632, China; Department of Optoelectronic Engineering, Jinan University, Guangzhou 510632, China. Electronic address: tzqchen@jnu.edu.cn.
  • Xingdan Chen
    Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Jinan University, Guangzhou 510632, China.
  • Shifu Zheng
    First Affiliated Hospital of Jinan University, Guangzhou 510632, China.